SMP7000-XX

  • 96 digital lines configurable as either input or output
  • Five available power supply rails for custom designs
  • Mix and match with standard SMIP switching and digital I/O modules to create high density configurations
  • VXIplug&play driver simplifies software development
  • On-board connector header for simplifed migration to PCB implementation
  • Access to 16 MHz clock for use in complex designs
  • Multiple front panel connector options

    Request A Quote
  • Overview
  • Models
  • Manuals
  • Data Sheets
  • Software
  • Drivers
  • Other
The SMP7000-xx is a general purpose prototyping module that leverages the SMIP’s modularity and interface architecture to the VXIbus to provide over 24 square inches of real estate that is available for user-defined designs. System engineers can incorporate their own designs within a standard SMIP carrier and combine it with products,
such as 1.8 GHz RF switching or 16 A relays that are already available on the platform. Custom DAC modules, or digital I/O cards with custom logic levels can easily be accommodated within the available breadboard space.

Flexible Interface and Programming Options
The SMP7000-xx provides access to 96 digital I/O lines and five fused power rails for interfacing to user-defined logic. Custom designs can be laid out on the thru-hole pattern available on the breadboard space. A connector header is provided to facilitate migration of the custom design to a printed circuit board layout. This enables the use
of multiple front panel I/O possibilities, ranging from 15p Dsub to 160p high-density DIN connectors. All 96 digital lines are mapped to VXI extended memory space for direct register access. API support is also provided through the standard SMIP VXIplug&play driver, reducing the time required for software development. 
SMP7000-15 Modular Prototyping breadboard with 15p DSub
SMP7000-160 Modular Prototyping breadboard with 160p DSub
SMP7000-25 Modular Prototyping breadboard with 25p DSub
SMP7000-44 Modular Prototyping breadboard with 44p DSub
SMP7000-62 Modular Prototyping breadboard with 62p DSub

img1
SMIP II Switching Product Manual - 82-0056-000
Title
Document
Download
SMIP II Switching Product Manual - 82-0056-000
DocumentSMIP II Switching Product Manual - 82-0056-000
img1
SMIPII Connectors Datasheet
img1
SMP7000 Series Datasheet
Title
Document
Download
SMIPII Connectors Datasheet
DocumentSMIPII Connectors Datasheet
SMP7000 Series Datasheet
DocumentSMP7000 Series Datasheet
img1
SMIP Non-Vol Loader
Title
Document
Download
SMIP Non-Vol Loader
DocumentSMIP Non-Vol Loader
img1
SMIP - LabVIEW Driver
img1
SMIP Driver-72-0029-012
img1
SMIP Family - IVI DRIVER (rev 2.12.1)
Title
Document
Download
SMIP - LabVIEW Driver
DocumentSMIP - LabVIEW Driver
SMIP Driver-72-0029-012
DocumentSMIP Driver-72-0029-012
SMIP Family - IVI DRIVER (rev 2.12.1)
DocumentSMIP Family - IVI DRIVER (rev 2.12.1)
img1
Switching Introduction
Title
Document
Download
Switching Introduction
DocumentSwitching Introduction

* Required entries
 Required for USA and Canada
Note:
If you experience any difficulty submitting this form, contact: webmaster@zygo.com

** You may withdraw this consent at any time using the "unsubscribe" link at the bottom of any page on this web site.
X
By continuing to use this site, you agree to our Privacy Policy.
OK